Making of Wi-Fi Jammer (ONLY FOR EDUCATIONAL PURPOSE AND TESTING)
Components required:
1. NODEMCU ESP8266 Board [ https://amzn.to/3mSrqqc ]
Connection:
In this project we do not need any other external connection. You need power up the board using USB cable or 5v to VIN and GND.
Coding:
You need to download the files from here, DOWNLOAD
Refer my Youtube video
Connect ESP8266 to computer By USB cable
After downloading the files open ESP8266Flasher.exe
Click on CONFIG then press the first setting button and select deauther_2.1.0_1mb.bin file
Address: 0x00000
In Advanced section,
Baudrate: 230400
Flash size: 230400
Flash Speed: 80 MHz
SPI Mode: DIO
Then, select the port and Hit the Flash Button
Working:
After Uploading the Firmware
Power Up the ESP8266 then,
Check the Wi-Fi Available in Phone or PC
You can find a Wi-Fi named pwned connect PASSWORD: deauther
After that, go to any browser in URL column type 192.168.4.1 press GO
In Scan section select which wi-fi you want to attack and go to attack section start the deauther attack
You can also create Many Fake wi-fi AP's
Probe attack and beacon attack is also there. Check It.
Post a Comment